The distribution and degradation of radiolabeled superparamagnetic iron oxide nanoparticles and quantum dots in mice.

(51)Cr-labeled, superparamagnetic, iron oxide nanoparticles ((51)Cr-SPIOs) and (65)Zn-labeled CdSe/CdS/ZnS-quantum dots ((65)Zn-Qdots) were prepared using an easy, on demand, exchange-labeling technique and their particokinetic parameters were studied in mice after intravenous injection. The results indicate that the application of these heterologous isotopes can be used to successfully mark the nanoparticles during initial distribution and organ uptake, although the (65)Zn-label appeared not to be fully stable. As the degradation of the nanoparticles takes place, the individual transport mechanisms for the different isotopes must be carefully taken into account. Although this variation in transport paths can bring new insights with regard to the respective trace element homeostasis, it can also limit the relevance of such trace material-based approaches in nanobioscience. By monitoring (51)Cr-SPIOs after oral gavage, the gastrointestinal non-absorption of intact SPIOs in a hydrophilic or lipophilic surrounding was measured in mice with such high sensitivity for the first time. After intravenous injection, polymer-coated, (65)Zn-Qdots were mainly taken up by the liver and spleen, which was different from that of ionic (65)ZnCl2. Following the label for 4 weeks, an indication of substantial degradation of the nanoparticles and the release of the label into the Zn pool was observed. Confocal microscopy of rat liver cryosections (prepared 2 h after intravenous injection of polymer-coated Qdots) revealed a colocalization with markers for Kupffer cells and liver sinusoidal endothelial cells (LSEC), but not with hepatocytes. In J774 macrophages, fluorescent Qdots were found colocalized with lysosomal markers. After 24 h, no signs of degradation could be detected. However, after 12 weeks, no fluorescent nanoparticles could be detected in the liver cryosections, which would confirm our (65)Zn data showing a substantial degradation of the polymer-coated CdSe/CdS/ZnS-Qdots in the liver.

Nanoparticle-based autoantigen delivery to Treg-inducing liver sinusoidal endothelial cells enables control of autoimmunity in mice.

BACKGROUND & AIMS: It is well-known that the liver can induce immune tolerance, yet this knowledge could, thus far, not be translated into effective treatments for autoimmune diseases. We have previously shown that liver sinusoidal endothelial cells (LSECs) could substantially contribute to hepatic tolerance through their ability to induce CD4+ Foxp3+ regulatory T cells (Tregs). Here, we explored whether the Treg-inducing potential of LSECs could be harnessed for the treatment of autoimmune disease. METHODS: We engineered a polymeric nanoparticle (NP) carrier for the selective delivery of autoantigen peptides to LSECs in vivo. In the well-characterized autoimmune disease model of experimental autoimmune encephalomyelitis (EAE), we investigated whether administration of LSEC-targeting autoantigen peptide-loaded NPs could protect mice from autoimmune disease. RESULTS: We demonstrate that NP-based autoantigen delivery to LSECs could completely and permanently prevent the onset of clinical EAE. More importantly, in a therapeutic approach, mice with already established EAE improved rapidly and substantially following administration of a single dose of autoantigen peptide-loaded NPs, whereas the control group deteriorated. Treatment efficacy seemed to depend on Tregs. The Treg frequencies in the spleens of mice treated with autoantigen peptide-loaded NPs were significantly higher than those in vehicle-treated mice. Moreover, NP-mediated disease control was abrogated after Treg depletion by repeated administration of Treg-depleting antibody. CONCLUSION: Our findings provide proof of principle that the selective delivery of autoantigen peptides to LSECs by NPs can induce antigen-specific Tregs and enable effective treatment of autoimmune disease. These findings highlight the importance of Treg induction by LSECs for immune tolerance.

The cell-type specific uptake of polymer-coated or micelle-embedded QDs and SPIOs does not provoke an acute pro-inflammatory response in the liver.

Semiconductor quantum dots (QD) and superparamagnetic iron oxide nanocrystals (SPIO) have exceptional physical properties that are well suited for biomedical applications in vitro and in vivo. For future applications, the direct injection of nanocrystals for imaging and therapy represents an important entry route into the human body. Therefore, it is crucial to investigate biological responses of the body to nanocrystals to avoid harmful side effects. In recent years, we established a system to embed nanocrystals with a hydrophobic oleic acid shell either by lipid micelles or by the amphiphilic polymer poly(maleic anhydride-alt-1-octadecene) (PMAOD). The goal of the current study is to investigate the uptake processes as well as pro-inflammatory responses in the liver after the injection of these encapsulated nanocrystals. By immunofluorescence and electron microscopy studies using wild type mice, we show that 30 min after injection polymer-coated nanocrystals are primarily taken up by liver sinusoidal endothelial cells. In contrast, by using wild type, Ldlr (-/-) as well as Apoe (-/-) mice we show that nanocrystals embedded within lipid micelles are internalized by Kupffer cells and, in a process that is dependent on the LDL receptor and apolipoprotein E, by hepatocytes. Gene expression analysis of pro-inflammatory markers such as tumor necrosis factor alpha (TNFα) or chemokine (C-X-C motif) ligand 10 (Cxcl10) indicated that 48 h after injection internalized nanocrystals did not provoke pro-inflammatory pathways. In conclusion, internalized nanocrystals at least in mouse liver cells, namely endothelial cells, Kupffer cells and hepatocytes are at least not acutely associated with potential adverse side effects, underlining their potential for biomedical applications.

Synthesis of radioactively labelled CdSe/CdS/ZnS quantum dots for in vivo experiments.

During the last decades of nanoparticles research, many nanomaterials have been developed for applications in the field of bio-labelling. For the visualization of transport processes in the body, organs and cells, luminescent quantum dots (QDs) make for highly useful diagnostic tools. However, intercellular routes, bio-distribution, metabolism during degradation or quantification of the excretion of nanoparticles, and the study of the biological response to the QDs themselves are areas which to date have not been fully investigated. In order to aid in addressing those issues, CdSe/CdS/ZnS QDs were radioactively labelled, which allows quantification of the QD concentration in the whole body or in ex vivo samples by γ-counting. However, the synthesis of radioactively labelled QDs is not trivial since the coating process must be completely adapted, and material availability, security and avoidance of radioactive waste must be considered. In this contribution, the coating of CdSe/CdS QDs with a radioactive (65)ZnS shell using a modified, operator-safe, SILAR procedure is presented. Under UV illumination, no difference in the photoluminescence of the radioactive and non-radioactive CdSe/CdS/ZnS colloidal solutions was observed. Furthermore, a down-scaled synthesis for the production of very small batches of 5 nmol QDs without loss in the fluorescence quality was developed. Subsequently, the radio-labelled QDs were phase transferred by encapsulation into an amphiphilic polymer. γ-counting of the radioactivity provided confirmation of the successful labelling and phase transfer of the QDs.

Shedding light on vacancy-doped copper chalcogenides: shape-controlled synthesis, optical properties, and modeling of copper telluride nanocrystals with near-infrared plasmon resonances.

Size- and shape-controlled synthesis of copper chalcogenide nanocrystals (NCs) is of paramount importance for a careful engineering and understanding of their optoelectronic properties and, thus, for their exploitation in energy- and plasmonic-related applications. From the copper chalcogenide family copper telluride NCs have remained fairly unexplored as a result of a poor size-, shape-, and monodispersity control that is achieved via one-step syntheses approaches. Here we show that copper telluride (namely Cu(2-x)Te) NCs with well-defined morphologies (spheres, rods, tetrapods) can be prepared via cation exchange of preformed CdTe NCs while retaining their original shape. The resulting copper telluride NCs are characterized by pronounced plasmon bands in the near-infrared (NIR), in analogy to other copper-deficient chalcogenides (Cu(2-x)S, Cu(2-x)Se). We demonstrate that the extinction spectra of the as-prepared NCs are in agreement with theoretical calculations based on the discrete dipole approximation and an empirical dielectric function for Cu(2-x)Te. Additionally we show that the Drude model does not appropriately describe the complete set of Cu(2-x)Te NCs with different shapes. In particular, the low-intensity longitudinal plasmon bands for nanorods and tetrapods are better described by a modified Drude model with an increased damping in the long-wavelength interval. Importantly, a Lorentz model of localized quantum oscillators describes reasonably well all three morphologies, suggesting that holes in the valence band of Cu(2-x)Te cannot be described as fully free particles and that the effects of localization of holes are important. A similar behavior for Cu2-xS and Cu(2-x)Se NCs suggests that the effect of localization of holes can be a common property for the whole class of copper chalcogenide NCs. Taken altogether, our results represent a simple route toward copper telluride nanocrystals with well-defined shapes and optical properties and extend the understanding on vacancy-doped copper chalcogenide NCs with NIR optical resonances.

Stimuli-responsive hierarchically self-assembled 3D porous polymer-based structures with aligned pores.

We have developed a novel approach for the fabrication of self-assembled porous materials with uniaxial tubular pores. The approach is based on the use of microtubes formed by stimuli-induced rolling of polymer bilayers consisting of hydrophobic and stimuli-responsive hydrophilic polymers. Different objects, for example yeast cells, can be encapsulated inside the tubes during their rolling. The self-rolled tubes filled with the yeast cells are capable of controlled self-assembly and form a uniaxial tubular homogeneously filled scaffold. Moreover, our approach allows design of porous materials with the pores having different properties.

Synthesis of monodisperse cadmium phosphide nanoparticles using ex-situ produced phosphine.

The synthesis of nanoparticles using a gas-liquid interfacial reaction, which for the first time is shown to result in highly monodisperse materials across a range of sizes, is presented. We demonstrate, using cadmium phosphide as the paradigm that this synthesis method can provide colloidal nanocrystals or quantum dots monodisperse enough so that for the first time multiple transitions in their absorbance spectra can be observed. Clear evidence is given that the resulting cadmium material is Cd(6)P(7) and not Cd(3)P(2), and a thorough investigation into the role of temperature and growth time and their effects on the optical properties has been conducted. This strategy can be extended to synthesize other relevant members of the binary component pnictide semiconducting family, and the chemistry of the pnictide compound formation using this synthetic methodology has been explained using the redox potential of the metals. The suitability of the resulting cadmium phosphide quantum dots for applications in light-emitting diodes (LEDs) has further been demonstrated.

Brown adipose tissue activity controls triglyceride clearance.

Brown adipose tissue (BAT) burns fatty acids for heat production to defend the body against cold and has recently been shown to be present in humans. Triglyceride-rich lipoproteins (TRLs) transport lipids in the bloodstream, where the fatty acid moieties are liberated by the action of lipoprotein lipase (LPL). Peripheral organs such as muscle and adipose tissue take up the fatty acids, whereas the remaining cholesterol-rich remnant particles are cleared by the liver. Elevated plasma triglyceride concentrations and prolonged circulation of cholesterol-rich remnants, especially in diabetic dyslipidemia, are risk factors for cardiovascular disease. However, the precise biological role of BAT for TRL clearance remains unclear. Here we show that increased BAT activity induced by short-term cold exposure controls TRL metabolism in mice. Cold exposure drastically accelerated plasma clearance of triglycerides as a result of increased uptake into BAT, a process crucially dependent on local LPL activity and transmembrane receptor CD36. In pathophysiological settings, cold exposure corrected hyperlipidemia and improved deleterious effects of insulin resistance. In conclusion, BAT activity controls vascular lipoprotein homeostasis by inducing a metabolic program that boosts TRL turnover and channels lipids into BAT. Activation of BAT might be a therapeutic approach to reduce elevated triglyceride concentrations and combat obesity in humans.

Synthesis and characterization of cadmium phosphide quantum dots emitting in the visible red to near-infrared.

The synthesis of high-quality cadmium phosphide quantum dots with emission wavelength maxima in the range from 1200 to approximately 760 nm are reported. The results demonstrate that the nucleation and growth linked with the optical properties can be controlled by the temperature, the growth time, and the addition of ligands such as oleylamine and trioctylphosphine. Photoelectrochemical investigations revealed that the cadmium phosphide QD-derivatized electrodes show an optical response and that photocurrents of several nanoamperes per square centimeter can be obtained upon illumination.

Size and shape control of colloidally synthesized IV-VI nanoparticulate tin(II) sulfide.

We report the synthesis and characterization of monodisperse SnS nanocrystals and demonstrate shape control by varying the ratio of ligands present in the reaction mixture. The nanoparticles are subsequently linked to conducting transparent substrates, and their optoelectronic response is probed. Values of the photocurrent for this system, without attempts to optimize, in the range of 6-8 nA cm(-2) were obtained.